DISPLAY PLUG＆PLAY MULTIFUNCTION CHROME PRO2

【Included in the kit】
・Chrome Pro 2
・Antenna with 90 degree SMA joint for TPMS receiver
・GPS receiver
・Main wiring
・2 TPMS receivers with adapters (optionally for 8.5mm or 11.5mm valves)
・BOSH LSU 4.9 lambda probe
・Cleaning cloth

※画像はイメージです。
※This display is universal but is not compatible with Ducati 1098， 1198， Panigale 899／959／1199／1299 (specific version available in our store).
※For correct assembly it is also necessary to purchase the specific I2M harness for your motorcycle model， available on our website.
※the I2M TPMS sensors are not compatible with the original Ducati Panigale V2 rim.
※取り扱い説明書が付属する場合は、英語となります。
※輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。
※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。

The Chrome PRO2 represents the latest evolution of the Chrome family by further extending the functions of the Pro version.

Designed for the most demanding riders and teams，it is able to read and acquire over 128 Can Bus channels that are flanked by 30 standards including speed，rpm，external analogue，tire pressures and temperatures，GPS，gears，water and oil ...

The new hardware makes it possible to make channel acquisition completely configurable with a maximum frequency of 500Hz for each channel，thus reaching a total sampling frequency of over 65k Sample／s！

Designed for the most demanding user，now the Chrome Pro 2 is not only able to connect to a WiFi network thanks to its integrated antenna，but can create a Wifi HotSpot itself.

Connectivity then extends to the management of low energy Polar H7 and H10 heart belts and to connectivity to PC and Mac not only via USB key but also via a special configuration cable.

Great attention was paid to the total configurability of every aspect starting from the alarms，now all RGB，up to the possibility of creating non-linear sensors for each input.
A new integrated wiring with a single IP67 connector and new adapter cards complete the new experience linked to the Chrome PRO 2.
The Chrome PRO also incorporates a 433Mhz receiver that allows it to interface with our supplied TPMS sensors.
Finally，this model can also be ordered with the full carbon case，reducing the weight of the dashboard by 25％.
TMPS sensors included.
Available for 8.3 mm or 11.3 mm rims (valves not included)

Thanks to the collaboration with Tecnoart Sersan，the Chrome PRO 2 is enriched with new screens.
Born in 2018 thanks to the development of a special graphics for his special on MV，this time the collaboration generated new screens that will gradually enrich those already present on Chrome Pro2.

Technical features：
- Graphic display 5 "in color 800x480
- Very high visibility even in direct sunlight
- 1GHz processor with 1GB of RAM memory
- Aluminum case machined from solid
- Fully configurable pilot and mechanic pages
- 10Hz GPS speed and trajectory detection with 66 parallel channels
- Stopwatch function with 20 preset circuits，memory of 500 laps per circuit
- Automatic recognition of the circuit，with four sectors
-Calculation of best lap，ideal，difference with the best lap or with the last lap，historical maximum values and the current day
- Programming via USB key，WiFi or with USB cable (optional)
- 11 fully configurable high brightness RGB alarms
- IP67 protection
- Connection to Polar H7 or H10 heart belts
- 8 10-bit analog inputs
- 2 speed inputs and 1 RPM input
- Separate completely configurable water，petrol and oil inputs，also Can Bus
- 128 Can Bus acquisition channels at 500Hz each
- Overall sampling rate greater than 65MSample／s
- Data download via USB stick，or WiFi
- Possibility of connecting a two-button remote control without additional interfaces
- Auxiliary can bus for expansion modules
- 16GB internal memory storage
- Possibility of WebCam C270 connection for synchronization of the acquired data
- 3 different meters of distance traveled，2 of operating hours and total revolutions
- Integrated lambda probe controller and BOSH LSU 4.9 sensor included
- TPMS receiver with 4 pre-programmable channels per wheel and two sensors included

ユーザのインプレッションを見る