PAIR OF HANDLEBARS

【Main dimensional characteristics】
-7 °inclination angle
-20mm feed offset
-Tube length 240mm
-Useful length of tube 240mm
-Pipe section：diam. East. 22mm - diam. int. 16.5mm
-For forks diam. 51 mm

※画像はイメージです。
※For correct assembly， the steering limiter code LS.AP.7211 must also be purchased.
※取り扱い説明書が付属する場合は、英語となります。
※輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。
※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。

Developed to match our upper triple clamp and built with the proven technology of our GP model.

Technical description：
-As in use in modern GP and SBK， an Allen key binds the handlebar and steering plate allowing a continuous rotation of 14° of the handlebar itself， from the original opening to the racing one.
This solution gives a further advantage in terms of safety for the driver and facilitates the set-up operations in the pits both in the case of disassembly of the forks (the half-handlebars remain attached to the upper plate) and for adjusting the half-handlebar opening.
-We have adopted a front truncated-cone type cuff-socket coupling system of GP derivation to obtain high rigidity and minimum external dimensions.
-This choice offers as a further advantage the possibility of exploiting the entire length of the socket for mounting the controls.
-Predetermined collapse section to avoid overloading the fork sleeve， irreparably damaging the internal hydraulics in case of failure of the socket (cause of a fall).
-The half-handlebar is also equipped with an anti-rotation and anti-slip system.
This solution guarantees maximum safety and allows the quick and precise positioning of levers and push-button panels for teams that use the preassembly of commands on the posts， should it be necessary to remove the post from the cuff following a fall.
-Nonio for adjusting the corner opening of the handlebars.
The combination with our upper steering plate makes registration extremely easy and fast without the use of special masks.
-Double stainless steel screw for tightening the bracelet.
-On the end of the stub there is an indispensable vernier if you need to shorten it to a size more suited to your needs.


ユーザのインプレッションを見る

適合車種： RS 660 ( 適合車種を見る )